Seal Brush Strip

The production process of the sealing brush is usually as follows:

1. Prepare materials: Select suitable bristles, such as nylon, bristles, wire, etc., and base materials for fixing bristles, such as steel tape and aluminum tape.

2. Finishing the bristles: comb and tidy the bristles to remove the hairy and irregular parts.

3. Fixed bristles: the bristles are evenly fixed on the base material by inlaying, welding, bonding, etc.

4. Trimming and shaping: Trim the bristles as needed to make them a consistent length and ensure that the shape of the brush is regular.

The installation steps for sealing brush strips are as follows:

1. Clean the installation position: Ensure that the installation position is clean and free of debris and oil to ensure the sealing effect.

2. Measurement and cutting: According to the size of the installation part, the sealing brush strip is accurately measured and cut to the appropriate length.

3. Installation and fixing: Use screws, rivets, glue and other ways to firmly install the sealing brush in the predetermined position.

4. Check and adjust: After the installation is complete, check whether the sealing brush is firmly installed and whether the sealing effect meets the requirements. If necessary, make appropriate adjustments.

It should be noted that when making and installing sealing brush strips, appropriate materials and methods should be selected according to the specific use scenario and requirements to ensure its sealing performance and service life.